SP - Pristine SeriesALL-Electric PET Stretch Blow Moulding Machine

Preform Handling

  • Loading on Oven Mandrels using Turret Wheel System.

Heat Conditioning

  • Close Loop Heating Control (Auto Preform Temperature Control).
  • Variable speed ventilators for accurate Chamber Temperature Control.
  • Modular Heating System for quick maintenance of Heating Lamps.
  • Replica jig for Simpler, Faster and Accurate positioning of Heating Lamps.

Stretching

  • Servo Stretching in Dual mode in synchronization with Mould Clamp, to reduce cycle time.
  • Precise control of Preblow (Primary Blow) and Blowing (Final Blow).
  • Reduced Frictional and Inertia loss.

Mould Clamp

  • Electrical Mould Clamp using servo system.
  • Mould Compensation for faster and positive locking without vibration.
  • Synchronized with Stretching functions.

Energy Saving

  • No Low Pressure Air required. Blowing air is recovered and re-collected to be used for machine operations, fed back to booster compressor.
  • Heating lamps adjustable to go closest to perform, to reduce attenuation loss.
SP Pristine Series-I
Model SP-Pristine
06-2
SP-Pristine
07-1
SP-Pristine
07-1 / 04-2
SP-Pristine
08-0.6
SP-Pristine
08-0.6 / 04-2
Mould Clamp
Type
Servo Servo Servo Servo Servo
Stretching
Type
Servo Servo Servo Servo Servo
Production Rate
(Bottles / Hour)*
9000 10500 6000 12000 6000
Max Bottle
Volume (ml)
1500 1000 2000 600 2000
Max Neck
Size (mm)**
30 30 30 30 30
No of Cavities 6 7 4 8 4
Max Container Dia (mm) 105 89 105 76.5 105
Max Container Height (mm) 350 350 350 350 350
Max Blowing
Pressure (kg/cm2)
40 40 40 40 40
Machine Dimensions
Length (mm) 10400 10400 10400 10400 10400
Width (mm) 2850 2850 2850 2850 2850
Height (mm) 3300 3300 3300 3300 3300
Electricals
Total Load (kW) 168 143 143 128 128
Heating Load (kW) 111 94 94 84 84
Air Requirements
Blowing (CFM) 260
(1000ml @ 32 Bar)
320
(1000ml @ 32 Bar)
190
(1000ml @ 32 Bar)
250
(500ml @32 Bar)
190
(1000ml @ 32 Bar)
Operations (CFM)
Without Recovery
12 12 12 12 12
Operations (CFM)
After Recovery
Not
Required
Not
Required
Not
Required
Not
Required
Not
Required
SP Pristine Series-II
Model SP-Pristine
06-2
SP-Pristine
07-1
SP-Pristine
07-1 / 04-2
SP-Pristine
08-0.6
SP-Pristine
08-0.6 / 04-2
Mould Clamp
Type
Servo Servo Servo Servo Servo
Stretching
Type
Servo Servo Servo Servo Servo
Production Rate
(Bottles / Hour)*
9000 10500 6000 12000 6000
Max Bottle
Volume (ml)
1500 1000 2000 600 2000
Max Neck
Size (mm)**
30 30 30 30 30
No of Cavities 6 7 4 8 4
Max Container Dia (mm) 105 89 105 76.5 105
Max Container Height (mm) 350 350 350 350 350
Max Blowing
Pressure (kg/cm2)
40 40 40 40 40
Machine Dimensions
Length (mm) 8800 8800 8800 8800 8800
Width (mm) 3050 3050 3050 3050 3050
Height (mm) 3300 3300 3300 3300 3300
Electricals
Total Load (kW) 106 97 97 88 88
Heating Load (kW) 70 64 64 58 58
Air Requirements
Blowing (CFM) 260
(1000ml @ 32 Bar)
320
(1000ml @ 32 Bar)
190
(1000ml @ 32 Bar)
250
(500ml @32 Bar)
190
(1000ml @ 32 Bar)
Operations (CFM)
Without Recovery
12 12 12 12 12
Operations (CFM)
After Recovery
Not
Required
Not
Required
Not
Required
Not
Required
Not
Required

*Nominal Production (for up to 500 ml/1000 ml water bottle as applicable)
** Other Neck Configurations available on request
Specificqations subject to change

Designed by Webinfinium